Basic setup
Auto Setup
The Auto Setup function helps to install your TV/DVD easily.
It leads you the Language selection, Air/Cable selection and Automatic
channel search.
IMPORTANT: Make sure that the antenna or cable TV system
connection is made!
Auto Setup
To turn on the TV/DVD, press POWER.
1
•
POWER indicator on the front of the unit
changes green. It may take approx. 10 seconds
for a picture to appear on screen.
Auto Setup menu appears on the screen.
2
Press ▲ or ▼ to select "Language", then
press ◀ or ▶ to select your desired language.
Press ▲ or ▼ to select "Signal Type", then
3
press ◀ or ▶ to select "Air" or "Cable".
Air
- VHF/UHF channels
Cable
- Cable TV channels
Press ▲ or ▼ to select "Automatic Search",
4
then press ENTER.
50S0301A.indb 21
50S0301A.indb 21
Auto Setup
Language
English
Signal Type
Cable
Automatic Search
Start
: Select
: Adjust
Auto Setup
Language
English
Signal Type
Cable
Automatic Search
Start
: Select
: Adjust
Auto Setup
Language
English
Signal Type
Cable
Automatic Search
Start
: Select
ENTER:Set
5
Now the "Automatic Search" starts.
Auto Setup
•
If you press EXIT/CANCEL, the Automatic
Search stops and changes to the TV screen.
•
After the starting setup is completed, the TV
channel appears on the screen.
Note:
•
The Auto Setup function will work only when you
press POWER for the first time.
•
The process of "Automatic Search" may take 15 to
30 minutes to complete, depending on your regional
cable service.
POWER
ENTER
/ / /
EXIT/CANCEL
Language
English
Signal Type
Cable
Automatic Search
Start
Analog Channel Found : 0
Digtal Channel Found :
0
EXIT : End
21
2/5/08 5:58:39 PM
2/5/08 5:58:39 PM