Playback (Vcr); Loading And Unloading A Cassette Tape - Toshiba MW27H62 Owner's Manual

Playback (VCR)

Loading and unloading a cassette tape

Use only video cassette tapes marked
Loading
Push the center of the tape until it is automatically
inserted.
Automatic power ON
When you insert a cassette tape, the unit power will turn ON automatically.
Automatic playback
When loading a cassette tape without an erase prevention tab, playback will start automatically.
Unloading
1 Press STOP/EJECT on the front panel or EJECT
on the remote control.
or
Automatic tape eject
This unit will automatically rewind the tape when the tape has ended. And when the tape is rewinded to its beginning,
the cassette tape will be ejected automatically.
Notes:
• Always eject the tape when not in use.
• The cassette tape can be ejected even if the POWER is "OFF".
To prevent accidental erasure
To prevent accidental erasure
Remove the erase prevention tab with a screwdriver.
Erase prevention tab
Tape speed and maximum recording time
Tape Speed
SP (Standard Play)
SLP (Super Long Play)
40
5V60101A [E]p40-44
.
Screwdriver
T-160 T-120
2-2/3 hours 2 hours
8 hours 6 hours
40
Insert the cassette tape with its labeled side facing up
and the erase prevention tab positioned at your left. An
inverted cassette tape cannot be inserted.
Erase prevention tab
2
Remove the cassette tape.
To record again
Cover the hole with a piece of adhesive tape.
Adhesive tape
Video cassette tape
T-90 T-60
1-1/2 hours 1 hour
4-1/2 hours 3 hours
2/22/06, 1:06 PM
T-30
30 minutes
1-1/2 hours