Toshiba MW27H62 Owner's Manual page 25

■ CHANNEL UP/DOWN
Press and release CH
matically stops at the next channel set into memory.
For proper operation, before selecting channels, they
should be set into the memory. See page
memorize channels".
■ CHANNEL RETURN
This button allows you to go back to the last channel
selected by pressing CH RTN. Press CH RTN again to
return to the last channel you were watching.
Note:
The CHANNEL RETURN feature is invalid between other
input sources.
■ MUTE
Press MUTE to switch off the sound. The unit's sound
will be silenced and "MUTE" will appear briefly on the
screen. The sound can be switched back on by pressing
this button again or one of VOL
5V60101A [E]p23-29
or . The channel auto-
&
"To
+0
+0 %
+ / – .
MUTE
25
■ SLEEP
To set the unit to turn off after a preset amount of time,
press SLEEP on the remote control. The clock will
count down 10 minutes for each press of SLEEP (120,
110, ...10, 0). After the sleep time is programmed, the
display will appear briefly every ten minutes to remind
you that the sleep timer is operating. To confirm the
sleep timer setting, press SLEEP and the remaining
time will be displayed for a few seconds. To cancel the
sleep timer, press SLEEP repeatedly until the display
turns to 0.
2/22/06, 1:03 PM
TV/VCR
SLEEP
POWER
,
0–9
CH /
VOL +/–
MUTE
/
ENTER
INPUT
CH RTN
SLEEP
120
25