Message Indicators - GE ATLINKS 29472 User Manual

3. Press the SELECT button.
4. Use the REVIEW up or down arrow button to scroll to AUTO SET TIME.
5. Press the SELECT button.
6. Use the REVIEW up or down arrow button to choose YES or NO .
7. Press the SELECT button to confirm.
NOTE: You may press the MENU/EXIT button at any step to change the
options or exit the current menu.
M
ESSAGE
The following special messages indicate the status of a message or the
unit:
NO CALLS
UNKNOWN CALLER
BLOCKED CALL
INCOMPLETE DATA
NO DATA
START/END
RPT
I
NDICATORS
The Caller ID memory log is empty.
The incoming call does not have Caller ID service
or their service area is not linked to yours. If
UNKNOWN CALLER appears along with a calling
number, the name information for that number
was not available.
The caller is registered as "Private Number" and
their Caller ID information is withheld.
Caller information has been interrupted or
corrupted during transmission.
No Caller ID signal has been detected, or Caller ID
service has not been activated.
You are at the beginning or the end of the Caller
ID memory log.
The received Caller ID information is a repeated
new call.
Battery power level is low.
31