Installing The Phone; Onnecting The Ac; Connecting Lines 1+2 - GE ATLINKS 29472 User Manual

NOTE: If the 9 volt battery is not installed, or the battery power is low, the low
battery icon turns on in the display. You need to install or replace the battery.
IMPORTANT: If you are not going to use the telephone for more than 30
days, remove the battery because it may leak and damage the unit.
I
NSTALLING THE
Your two-line phone should be placed on a level surface, such as a desk or
table top, or you can mount it on a wall. A desktop/wall mounting pedestal
is packaged with your phone.
C
ONNECTING THE
Plug the power supply cord into the jack marked 9VAC on the back of the
base. Then plug the other end into an electrical outlet.
CAUTION: Use only the ATLINKS USA, Inc. 5-2515 power supply that
came with this unit. Using other power supplies may damage the unit.
C L
ONNECTING
LINE 1 + 2
P
HONE
AC (E
LECTRICAL
1+2 O
INES TO
) P
OWER
D -L
NE UAL INE
P J
HONE ACK
9