Screening Calls From The Message Playback; Answering System M Erasing Messages; Leaving A Memo; Remote Access - GE 26976 User Manual

M P
ESSAGE LAYBACK
The base display lets you know when you have messages. To play
messages, press the play/stop button.
While a message is playing, you can do the following:
• Press the play/stop button to stop the message playback.
• Press and release the rev button to restart the current message;
continue to press and press again the rev button to go to previous
messages.
• Press and release the skip button to go to the next message.
• Press the play/stop button to stop message playback.
A S
NSWERING
When the memory is full, the system answers after 10 rings. You should
erase some of the messages so the answering machine can record new
messages.
E M
RASING ESSAGES
Erase messages two ways: one message at a time with the erase button
or you may delete all previously played messages with one long press of
the erase button.
• To erase a message while its playing, press and release the erase
button .
• To erase all previously played messages, press and hold the erase
button for 2 seconds until the unit beeps and prompts you that all
messages have been erased.
L M
EAVING A
Use the memo feature to leave a message.
1. Press and hold the memo button down until you finish the message.
2. Begin speaking after you hear the beep.
3. Release the memo button after you are finished.
R A
EMOTE CCESS
This section explains remote access: using any touch-tone phone
1. Dial the phone number for the answering machine.
M
YSTEM EMORY
EMO
F
ULL
21