System Setup; On-Screen Menu Navigation - Toshiba D-VR3SU Owner's Manual

Setting the Remote Control
Your DVD Recorder-VCR remote control will work with
Toshiba televisions and compatible brands.
ON / STANDBY TV ON / STANDBTY
TV MUTE
100 + AUDIO
SELECT
INPUT SEL.
DVD VCR TV
VOL CH / TRK
OPEN/CLOSE F / ADV / SKIP
VCR Plus+ MARKER
RETURN CLEAR
DISPLAY TV / VCR SUBTITLE REC SPEED
REC DVD VCR REC PAUSE
COPY
PIP TIME SLIP
24 - English
To determine whether your television is compatible,
follow the instructions below.
1. Switch your television on.
2. Point the remote control towards the television.
3. Hold down the TV button and enter the two-figure code
corresponding to the brand of your television, by pressing
the appropriate numeric buttons.
Brand Codes Brand Codes
TOSHIBA 01 SHARP NEW 08, 13
RCA/GE 02 SANYO 09
SONY 03 MAGNAVOX 10
MITSUBISHI 04 GOLDSTAR 11
JVC 05 SAMSUNG 12
HITACHI 06 ZENITH 14
PANASONIC 07, 15 PIONEER 16
Result: If your television is compatible with the remote con-
trol, it will switch off.
It is now programmed to operate with the remote
control.
If several codes are indicated for your television
brand, try each one in turn until you find one that
Note
works.
You can then control the television using the following
buttons.
Button Function
POWER Used to switch the television on and off.
INPUT SEL. Used to select an external source.
VOL + or - Used to adjust the volume of the television.
CH ( or ) Used to select the required channel.
TV MUTE Used to toggle the sound on and off.
The various functions will not necessarily work on
all televisions. If you encounter problems, operate
Note
the television by using the TV' s remote control.

System Setup

•

On-Screen Menu Navigation . . . . . 25

•
Auto Clock Set . . . . . . . . . . . . . . . 26
•
Manual Clock Set . . . . . . . . . . . . . 27
•
Channel Set . . . . . . . . . . . . . . . . . 28
•
Setting Up the Language Features 29
•
Setting Up the Audio Options . . . . 30
•
Setting Up the Display (Video) Options . . . 31
•
Setting Up the Parental Control . . . 32
•
Auto Channel Memory . . . . . . . . . 33
•
Channel Add/Delete . . . . . . . . . . . 34
•
RF Out Channel . . . . . . . . . . . . . . 35
•
Guide Channel Setup . . . . . . . . . . 35
•
VCR Setting . . . . . . . . . . . . . . . . . 36
•
Video Input . . . . . . . . . . . . . . . . . 37
•
Front Display . . . . . . . . . . . . . . . . 38
On-Screen Menu
Navigation
The on-screen menus allow you to enable or disable vari-
ous functions on your DVD Recorder-VCR. Use the follow-
ing buttons to open and navigate through the on-screen
menus.
DVD-RAM(VR)
1 MENU Button
Press this button on the remote control while the
DVD or VCR is in Stop or Play mode to open the
on-screen MAIN MENU.
2 Up/Down and Left/Right
Use these buttons to move the selection bar
up/down and left/right to cycle through the
menu options.
Enter Button
3
Press this button on the remote control to confirm
any new settings.
4 Return Button
Press this button on the remote control to return to
the last MENU screen displayed or to exit the on-
screen MENU all together.
English - 25