Channel Add/Delete; Rf Output Channel; Guide Channel Setup - Toshiba D-VR3SU Owner's Manual

Channel Add/Delete

Use this feature if Auto Channel Search missed a
channel that you would like to add and delete a channel you
wish to remove.
1 Open "MENU"
With the DVD in stop mode, press the MENU
button.
2 Select "Setup"
œ❷
Using the buttons, move the
selection bar to "Setup" then press ENTER to select.
DVD-VIDEO
Select "Channel Set"
3
œ❷
Using the buttons, move the selection bar to
"Channel Set", then press Enter to select.
DVD-VIDEO
34 - English
Select "Channel Add/Delete"
4
Move the selection bar to "Channel Add/Delete,"
then press ENTER to select.
Select Channel to Add/Delete
5
Use the CH buttons to tune in the channel
/
number you wish to add or delete.
Use the number buttons to move the channel direct-
œ❷
ly. If you use the navigation button, the chan-
nel will be moved to the next memorized channel.
DVD-VIDEO
Add/Delete Channel.
6
Press Enter to move the cursor to select Add, then
❿¤
press if you want to select Delete. Press ENTER
to confirm your selection.
DVD-VIDEO

RF Output Channel

When you connect the DVD Recorder-VCR to TV with RF
Antenna Cable, follow the steps below to set the
RF output channel.
Open "MENU"
1
With the DVD in Stop or Play mode, press the
MENU button.
2 Select "Setup"
œ❷
Using the buttons, move the selection bar to
"Setup" then press ENTER to select.
3 Select "Channel Set"
œ❷
Using the buttons, move the selection bar to
"Channel Set," then press ENTER to select.
4 Select "RF Output Channel"
Move the selection bar to "RF output Channel",
then press right to change.
Change "RF Output CH"
5
œ❷¤
Select channel 3 or 4 using the button.
Then press ENTER to change.
Change "TV Channel"
6
A message will appear on your TV . When the mes-
sage disappears, change your TV to channel 3 or 4
to match the RF output channel of the player.

Guide Channel Setup

Set these guide channels so you can use VCR Plus+ codes for
timer recording. Before starting the settings, prepare a chart
showing the channels, station names and guide channels.
Open "MENU"
1
With the DVD in stop mode, press the MENU
button.
Select "Setup"
2
œ❷
Using the buttons, move the selection bar to
"Setup" then press ENTER to select.
English - 35