Upgrade Device - Dahua ITC231-RF1A-IR User Manual

Step 3. Select device to modify IP.
 Single: Click
 Batch modify: select device to change its IP, and click Modify IP.
Step 4. Set mode, IP, subnet mask and gateway.
Note:
When you modify IP, select "Same IP" as to set all IPs to the same one.
Step 5. Click OK.

5.2 Upgrade Device

It supports single or batch upgrade device.
Step 1. Open Quick Config Tool.
Step 2. Click
of target device to change its IP.
Figure 5-3
, see .
Figure 5-2