Dahua HAC-HFW2401R-Z-IRE6 User Manual
Dahua HAC-HFW2401R-Z-IRE6 User Manual

Dahua HAC-HFW2401R-Z-IRE6 User Manual

Hdcvi camera

Advertisement

Quick Links

HDCVI Camera User's Manual
Version 1.0.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HAC-HFW2401R-Z-IRE6 and is the answer not in the manual?

Questions and answers

Summary of Contents for Dahua HAC-HFW2401R-Z-IRE6

  • Page 1 HDCVI Camera User’s Manual Version 1.0.0...
  • Page 2: Table Of Contents

    Table of Contents General Introduction ........................1 Overview ..........................1 Features..........................1 Framework and Dimensions ......................2 Device Cable Structure ........................3 Installation ............................5 Menu ..............................8 HCVR Settings ........................8 Set Audio Coax ......................... 8 Menu Operation ........................ 9 Appendix Maintenance........................
  • Page 3 Welcome Thank you for purchasing our HDCVI camera! This user’s manual is designed to be a reference tool for your system. Please read the following safeguard and warnings carefully before you use this series product! Please keep this user’s manual well for future reference! Important Safeguards and Warnings Electrical safety ...
  • Page 4 Statement  Please refer to the actual product for more details; the manual is just for reference.  The manual will be regularly upgraded according to the product update; the upgraded content will be added in the manual without prior announcement. ...
  • Page 5: General Introduction

    1 General Introduction 1.1 Overview This series megapixel HD camera conforms to the HDCVI standard. It supports video signal high-speed long distance transmission without any delay. It can be controlled by the HCVR conforming to the HDCVI 1.2 Features  Adopt high performance CMOS image sensor, megapixel definition.
  • Page 6: Framework And Dimensions

    2 Framework and Dimensions Note: It fails to support OSD menu operation when it outputs SD video; it realizes zoom and focus operation via UTC when it outputs SD video for motorized vari-focal bullet. See Figure 2-1 for the dimension of model A. The unit is mm. Figure 2-1 See Figure 2-2 for the dimension of model B.
  • Page 7: Device Cable Structure

    3 Device Cable Structure Please refer to Figure 3-1 for DC 12V power input port. Figure 3-1 Please refer to Figure 3-2 for DC 12V/AC 24V power input port. Figure 3-2 Please refer to Figure 3-3 for power reverse port. Figure 3-3 Please refer to Figure 3-4 for video output port.
  • Page 8 Figure 3-5 Please refer to Figure 3-6 for alarm function port. Figure 3-6 Please refer to sheet 3-1 for description of alarm cable. Color Port Function Alarm input port, it is to receive the signal of ALARM_IN external alarm. Black ALARM_GND Alarm GND Alarm output common contact, on-off value alarm...
  • Page 9: Installation

    4 Installation Attention:  Please install the device in time after it is taken apart, which is to avoid the camera module being exposed to damp environment for too long.  Before the installation, please make sure the installation surface is thick enough to sustain at least 3X weight of the camera.
  • Page 10 If it is model B, then loosen the screws on the bracket, adjust the camera to specific  monitoring direction via rotating bracket and camera body, and then fix the screws firmly. Step 3 Connect the video output port of the device to the back-end HCVR device, and connect power port to power supply.
  • Page 11 Left and right buttons fail to realize focus and zoom functions when operating OSD menu via five-direction buttons; you need to operate after exiting OSD menu. So far, device installation and cable connection have been completed, you can check monitoring image via back-end encoding device.
  • Page 12: Menu

    5 Menu 5.1 HCVR Settings This HDCVI camera series can adjust OSD menu via coaxial control. After connected the camera to the HDCVI series HCVR, from Main Menu->Setting->System->PTZ, you need to select the channel number for access and set control mode as HDCVI and the protocol as HD- CVI.
  • Page 13: Menu Operation

    Figure 5-2 5.3 Menu Operation Click the right mouse button and select “PTZ Control”, then you will see the “PTZ Setup” menu, which is as shown in Figure 5-3 and Figure 5-4. Figure 5-3...
  • Page 14: Figure

    Figure 5-4 See Sheet 4-1 for the details of button functions. Button Function Open menu Select menu item 、 Select menu value 、 Adjust lens zoom and auto trigger focus Note: Adjust lens focus Some of the buttons can only be applied for the motorized Auto focus under current vari-focal camera.
  • Page 15: Appendix Maintenance

    Appendix Maintenance Attention Please maintain the device according to the following instructions in order to ensure the image effect and long-term stable operation of the device. Maintenance for lens and mirror surface The lens and mirror surface are covered with antireflection coating, so it may produce hazardous substance and lead to performance reduction or scratch, dimness etc.

Table of Contents