Service Ram Addresses - Ricoh Bizworks 106 Service Manual

SERVICE RAM ADDRESSES

4.5 SERVICE RAM ADDRESSES
ø
CAUTION
Do not adjust an item labeled "Not used", as this may cause the machine to
malfunction. Such bits are only for use in other regions, such as Japan.
ø
CAUTION
Do not turn off the power when the LCD displays "Please wait" or
"Registered".
0000 to 0005(H) – Function bit switches (SwFunc)
0006 to 0009(H) – User parameter switches (SwUser)
000A to 001A(H) – Service bit switches (SwServ)
001B to 0025(H) – Country bit switches (SwCntry)
0F3C to 0FCC(H) – NCU parameters
0FE0 to 0FFF(H) – TTI (ASCII)
1000 to 1013(H) – CSI (ASCII)
1014(H) – Power saver mode time 1
1015(H) – Power saver mode time 2
1016(H) – Transmission monitor volume
1017(H) – Reception monitor volume
1018(H) – On-hook monitor volume
1019(H) – Dial monitor volume
101A(H) – Buzzer volume
101B(H) – Ringing volume
101C(H) – Not used
101D to 1044(H) – Redial number
1045 to 1048(H) – Copier counter
Address
1045(H) Hundred millions digit
1046(H) Millions digit
1047(H) Thousands digit
1048(H) Tens digit
Note: The following counters have the same data format as above.
1049 to 104C(H) – Fax transmission counter
104D to 1050(H) – Fax reception counter
1051 to 1054(H) – PC print counter
High
Ten millions digit
Ten thousands digit
Hundreds digit
Unit digit
00 – 02(H)
00 – 02(H)
00 – 02(H)
00 – 02(H)
00 – 02(H)
00 – 02(H)
Low
4-34
18 May, 1999