Reference; Troubleshooting; English - Toshiba D-VR3SG Owner's Manual

Reference

•
Troubleshooting (DVD-VIDEO/DVD-
RAM/DVD-RW/DVD-R) . . . . . . . 107
•

Troubleshooting . . . . . . . . . . . . . 108

•
Problems and Solutions (VCR) . . . . . 109
•
Specifications . . . . . . . . . . . . . . . . 110

106 - English

Troubleshooting
(DVD-VIDEO/DVD-RAM/DVD-RW/DVD-R)
Troubleshooting
Problems and Solutions (VCR)
Specifications
LIMITED WARRANTY TO ORIGINAL
PURCHASER
Troubleshooting
(DVD-VIDEO/DVD-RAM/DVD-RW/DVD-R)
If your product malfunctions, go through the check points below before contacting a Toshiba authorized
service center,
• Check whether the power cord is securely plugged into the power outlet.
No power.
• Did you press the ON/STANDBY button of your DVD Recorder-VCR.
The input is displayed
The DVD Recorder-VCR requires some time to initialize after it is turned on.
for a while when the
power turns on.
• Check whether the power cord is securely plugged into the power outlet.
Cannot record TV
• Did you set the DVD Recorder-VCR channel settings correctly?
programs.
• Check the free space on your DVD-RAM/DVD-RW/DVD-R disc.
• Check the antenna cable is connected.
Timer recording • Check the recording time, end time and current time settings again.
• Recording will be cancelled, if the power is removed due to a power
does not work
failure or other reason during recording.
properly.
• Check whether the disc is formatted. This product can record on
formatted discs only. (See page 102.)
Cannot record.
• Is the DVD-RAM cartridge protected?
Set the write protect tab to the unprotect position.
• Check whether your DVD-RAM/DVD-RW/DVD-R disc has a sufficient free space.
Recording is available on DVD-RAM/DVD-RW/DVD-R discs only.
I pressed the REC
If a program is copy protected, you cannot record it.
button but there is
no response.
Press the and button of your DVD Recorder-VCR at the same time when the
I forget the pass
power is on. All settings including password will revert to factory settings. Do not use it
word for parental
if not absolutely required.
care.
(Note that this function is available only when there is no disc inserted.)
• Check whether the disc is inserted correctly with the label facing up.
Cannot playback
• Check the regional code of your DVD disc.
the disc.
• This DVD Recorder-VCR cannot playback some types of disc. (See page 7.)
• Are you watching a program in slow or skip mode?
If you are playing a program at a speed other than normal speed, sound
No sound.
is not output.
• Check the connections and initial settings.
• Check whether the disc is damaged.
Clean up the disc, if necessary.
• Check whether the disc is inserted correctly with the label facing up.
English - 107