Table of Contents
Advertisement
If you wish to cancel the auto scanning before the
8
end, press the OK button.
• The time and date are set automatically from
the broadcast signal. If the signal is weak or
ghosting occurs, the time and date may not be
set automatically.
• Once the auto scanning procedure has finished,
some stations may have been stored more than
once; select the stations with the best reception
and delete the ones no longer required.
Presetting the Stations
Manually
If you have already set then automatically, you do not
need to preset the stations manually.
Open "MENU"
1
With the DVD in Stop mode, press the MENU
button.
2
Select "Setup"
Using the
buttons, move the selection bar
to "Setup" then press
or OK button to select.
3
Select "Install"
Using the
buttons, move the selection bar
to "Install", then press
or OK button to select.
Programme
30 - English
Select "Manual Setup"
4
Move the selection bar to "Manual Setup", using
the
buttons then press
or OK button to
select.
Programme
TV System
: G
36
Press the
buttons to select a PR number
5
as required then press
or OK button to select.
Decoder
Edit
Delete
Swap
Press the
button to select Edit.
6
Then press
or OK button to be displayed
"Manual Setup" menu.
Manual Setup
PR
01
CH
- - -
Name
- - - -
Decoder
Off
- - -
- - -
MFT
Done
Press the
buttons to start scanning the
7
channels.
The frequency band is scanned and the first sta-
tion found is displayed.
Press the
buttons until the NAME is select-
8
ed. The station name is set automatically from
the broadcast signal.
To change the programme's name, press the
9
button. The first letter of the name flashes.
Manual Setup
PR
01
2
CH
A - - -
Name
Decoder
Off
MFT
- - -
- - -
Done
To...
Then....
10
Select a Character Press the
button until
the required name character
is displayed (letters, numbers
or " - " character)
Move to the next or Press the
buttons
previous character respectively.
If you..
Then....
11
Wish to store the
• Press the
buttons until
station displayed
the MFT is selected.
• Press the
buttons to
adjust the picture, if neces-
sary.
• Select Done to store the station.
Do not wish to store • Press the
buttons until
the station displayed the CH is selected.
• Press the
buttons to
go on scanning the frequen-
cy band and display the
next station.
• Go back to the beginning of
step.
12
Press the
buttons to select Done and then
press OK button to confirm manual setting.
• Repeat this procedure from step 5 onwards,
until all the required stations have been stored.
Clearing a Preset
Station
If you have stored a TV station:
• That you do not require
• At the wrong programme positiom you can cancel it.
1
Open "MENU"
With the DVD in Stop mode, press the MENU
button.
2
Select "Setup"
Using the
buttons, move the selection bar
to "Setup" then press
or OK button to select.
Select "Install"
3
Using the
buttons, move the selection bar
to "Install", then press
or OK button to select.
Programme
Select "Manual Setup"
4
Using the
buttons, move the selection bar
to "Manual Setup" then press
or OK button to
select.
TV System
: G
Programme
: Ch 36
English - 31
Advertisement
Table of Contents
