Table of Contents
Advertisement
Intelligent Picture
Control (IPC)
The intelligent Picture Control Feature allows you to
adjust the sharpness of the image automatically, accord-
ing to your own preferences.
Open “MENU”
1
With the VCR in play mode, Press the MENU
button.
Select “Setup”
2
Using the
buttons, move the selection bar
to “Setup” then press
or OK button to select.
Select “System”
3
Using the
buttons, move the selection bar
to “System” then press
or OK button to select.
Programme
Select “VCR”
4
Move the selection bar to “VCR”, then press
or OK button.
VCR
Front Display
: Automatic
NICAM
: On
Programme
: RGB
AV1 Output
44 - English
Select “IPC”
5
Using the
buttons, move the selection bar
to “IPC” then press
or OK button to select the
IPC option.
• When intelligent picture control mode is ON, the
sharpness of the image is adjusted automatically.
Off
Programme
Off
On
6
To adjust the sharpness manually, press the
button to turn the IPC mode OFF.
7
Press the
buttons until the picture is dis-
played according to your preferences.
• If you do not press a button within ten seconds,
the IPC menu disappears automatically.
On completion, press RETURN button to exit the
8
menu.
You also can directly select this function using
IPC button on the remote control.
Note
Selection the Colour
Mode
Before recording or playing back a tape, you can select
the required system standard. Otherwise, the system
automatically selects the reception standard when you
select Automatic.
• When playing back a tape, the standard is automatical-
ly selected by the DVD Recorder-VCR.
Open “MENU”
1
With the VCR in play mode, Press the MENU
button.
Select “Setup”
2
Using the
buttons, move the selection bar
to “Setup” then press
or OK button to select.
Select “System”
3
Using the
buttons, move the selection bar
to “System” then press
or OK button to select.
Programme
Select “VCR”
4
Move the selection bar to “VCR”, then press
or OK button.
VCR
Front Display
: Automatic
NICAM
: On
Programme
: RGB
AV1 Output
Select “Colour System”
5
Using the
buttons, move the selection bar
to “Colour System” then press
or OK button to
select Colour System option.
Automatic -> PAL -> B/W.
• Automatic : When playing back a tape, the sys-
tem standard is automatically
selected by the DVD Recorder-
VCR.
• B/W :
Black and White.
Programme
On completion, press RETURN three times to
6
exit the menu.
English - 45
Advertisement
Table of Contents
