Basic Playback; Playing A Disc - Toshiba SD-5915SC Owner's Manual

Basic playback

Playing a Disc

This section shows you the basic on how to play
a disc.
Basic playback
Preparations
• When you want to view a disc, turn on the TV and select the video input connected to the DVD video player.
• When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the input connected to
the DVD video player.
• Press DVD to select DVD mode.
1
Press the ON/STANDBY button.
The DVD video player turns on.
The ON/STANDBY indicator on
the player illuminates.
When the DVD video player is turned on for the
first time, see CUSTOMIZING THE FUNCTION
SETTINGS (page 38 to 44) before proceeding to
step 2.
2
Press OPEN/CLOSE, place a disc on the disc
tray.
OPEN/CLOSE
The disc tray opens.
3
Press DISC SKIP to revolve the tray clockwise.
Place an other disc on the disc tray.
With the playback side down.
Place an other disc(s) on the disc holder(s).
DISC SKIP
• There are two different disc sizes. Place the disc
in the correct guide on the disc tray. If the disc is
out of the guide, it may damage the disc and
cause the DVD video player to malfunction.
• Do not place a disc which is unplayable in this
DVD video player.
20
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
ON/STANDYBY indicator
2
1
4
Press OPEN/CLOSE to close the disc tray.
Playback starts.
OPEN/CLOSE
Players will start to scan and play
from current closed location as the
first location. In case no disc is
available, it will skip to the next tray.
It will stop scanning after completion
of the fifth disc.
If you insert a DVD video disc that contains a top
menu, a menu may appear. See "Locating a title
using the top menu".
• You may need to press MENU button to display disc
menu (depending on the actual DVD video disc.)
Notes
• If the disc tray contains a disc you have already played,
playback will begin from the location where you last stopped
playback.
• Some Video CD are recorded with PBC (Playback Control),
a menu with recorded contents may appear on the TV if you
have turned the PBC on. You can make your selection
according to its PBC menu. Press MENU button on the remote
control to turn PBC on or off anytime during Video CD playback.
When switching from PBC off to PBC on mode, playback will
start from the beginning of the disc.
To start playback in the stop mode
Press PLAY.
PLAY
To playback from a specific disc tray number
Press DISC SKIP several times until you see your desired
tray number appears on the DVD display.
DISC SKIP
2, 4
PLAY
3
PAUSE
OPEN/CLOSE DISC SKIP
SKIP PAUSE STOP PLAY MENU
ENTER
STOP
/ ENTER
MENU
24
The disc on the selected disc tray
will be played back automatically.