Power Source; Basic Function; Headphone Jack - Toshiba CD328BT Instruction Manual

POWER SOURCE

This unit is designed to be operated on AC/DC.
AC OPERATION
Plug the tail of supplied AC power cord into AC socket on unit and the plug into household AC
outlet. The batteries will be automatically disconnected. This unit is designed in Switched-Mode
Power Source with voltage range from 100V to 240V.
DC OPERATION
Open the BATTERY COMPARTMENT DOOR. Install 8pcs UM-1/D size batteries (not included)
into compartment. Please follow correct polarities as indicated.
NOTE: when using battery, take off the AC cable from unit.
CAUTION:
Remove batteries if they are flat or not being used for a long period of time.
Batteries contain chemical substances, so they should be disposed of properly.

BASIC FUNCTION

SWITCHING ON THE UNIT
After connecting the power, press STANDBY button to unit or on remote control to turn on the
unit. Press the FUNC. button on unit or on remote control to choose TUNER / CD / USB / AUX
/SD CARD or BLUETOOTH function.
NOTE:
In CD/MP3/USB/SD/AUX/BT mode when the unit is not providing the main function for
15 minutes, the unit will automatically switch into standby mode. To turn on the unit again, press
"STANDBY" button or replug the unit.
ESD hints
– The product maybe reset or not reset to operation of control due to electrostatic
discharge, just switch off and reconnect again.
VOLUME ADJUSTING
Rotate the VOLUME button on unit or on remote control to increase or decrease volume.
EQ FUNCTION
This unit has a built-in equalizer system, Press EQ/LIGHT button on unit or EQ key on remote
control while playing to select different music style (sound tone): FLAT, CLASSIC, ROCK, POP
and JAZZ.

HEADPHONE JACK

For private listening, insert a 3.5mm headphone (not included) into the HEADPHONE jack (4).
The SPEAKER output would be automatically cut off.
CAUTION: LISTENING AT A HIGH VOLUME OVER A LONG PERIOD IS NOT GOOD FOR
YOUR EARS.
DISCO LIGHT
There are eight flashing modes of the disco light, press and hold the EQ/LIGHT button on unit or
press the LIGHT KEY on remote control to choose the desired mode: "LIGHT 01" to "LIGHT
07",and "LIGHT 08" is auto-changing between different color . To turn off the disco light, press
and hold the EQ/LIGHT button on unit or press the LIGHT KEY on remote control until "LIGHT
OFF" shows on the display.
3