Positioning - Smeg A1PYID-9 Manual

5.2 Positioning

Heavy appliance
Crushing hazard
• Position the appliance into the cabinet
cut-out with the help of a second person.
Pressure on the door
Risk of damage to the appliance
• Never use the oven door to lever the
appliance into place when fitting.
• Avoid exerting too much pressure on the
oven door when open.
• Do not use the handle to lift or move the
appliance.
Heat production during appliance
operation
Risk of fire
• Veneers, adhesives or plastic coatings
on adjacent furniture should be
temperature-resistant (not less than
90 °C).
Installation
General information
This appliance can be installed next to
walls, one of which can be higher than the
worktop, at a minimum distance of X mm
from the side of the appliance, as shown in
figures A and C relative to the installation
classes.
Any wall units positioned above the
worktop must be at a minimum distance of
at least Y mm. If a hood is installed above
the hob, refer to the hood instruction manual
to ensure the correct clearance is left.
X
Y
150 mm
750 mm
A - Class 1
(Free-standing appliance)
167