Pruner Safety Warnings - Ryobi OPP1850 Original Instructions Manual

■ Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
■ Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
■ Use the power tool, accessories and tool bits etc,
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
■ Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surtaces do not allow for safe handlíng and
control of the tool in unexpected situations.
BATTERY TOOL USE AND CARE
■ Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
■ Use power tools only with specifically designated
battery packs. Use of any other battery packs may
ereate a risk of injury and fire.
■ When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
Under abusive conditions, liquid may be ejected
■
from the battery; avoid contact. lf contact
accidentally occurs, flush with water. lf liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause írritation or
burns.
■ Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or
risk of injury.
Do not expose a battery pack or tool to fire
■
or excessive temperature. Exposure to fire or
temperature above 130'C may cause explosion.
■ Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging
improperly or at temperatures outside the specified
range may damage the battery and increase the risk
of fire.
SERVICE
■ Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
2
ADDITIONAL GENERAL SAFETY WARNINGS
■ Some regions have regulations that restrict the use of
the product. Check with your local authority for advice.
■ Never allow children or people unfamiliar with the
instructions to use the product. Local regulations may
restrict the age of the operator.
■ Ensure before each use that all controls and safety
devices function correctly. Do not use the product if the
"off" switch does not stop the motor.
■ Wear full eye and hearing protection, strong sturdy
gloves, as well as head protection while operating the
product; use a face mask if operation is dusty.
■ Do not wear loose fitting clothing, short trousers, or
jewellery of any kind.
■ Secure long hair so it is above shoulder level to prevent
entanglement in moving parts.
■ Beware of thrown, flying, or falling objects; keep all
bystanders, children, and animals at least 15 m away
from work area.
■ Do not operate in poor lighting. The operator requires a
clear view of the work area to identify potential hazards.
■ Use of hearing protection reduces the ability to hear
warnings (shouts or alarms). The operator must pay
extra attention to what is going on in the working area.
■ Operating similar tools nearby increases both the risk
of hearing injury and the potential for other persons to
enter your working area.
■ Keep firm footing and balance. Do not overreach.
Overreaching can result in loss of balance and can
increase the risk of kickback.
■ Keep all parts of your body away from any moving part.
■ Inspect the product before each use. Check for correct
operation of all controls. Check for loose fasteners,
make sure all guards, and handles are properly and
securely attached. Replace any damaged parts before
use.
■ Do not modify the product in any way or use parts
and accessories, which are not recommended by the
manufacturer.
■ Do not allow familiarity with the product to make you
careless. A careless fraction of a second is sufficient to
inflict serious injury.
■ Keep handles and grasping surfaces dry, clean, and
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of
the tool in unexpected situations.
If the product is dropped, suffers heavy impact, or begins
to vibrate abnormally, immediately stop the product and
inspect for damage or identify the cause of the vibration.
Any damage should be properly repaired or replaced by
an authorised service centre.

PRUNER SAFETY WARNINGS

■ Do not use the product when there is a possibility of
thunderstorm or lightning. Store the product safely
indoors.
WARNING