Ryobi OPP1850 Original Instructions Manual page 11

GETTING STARTED
1 2
Always wear safety goggles or safety glasses with side Install the shaft to the pruner attachment through the
shields when operating the product. Failure to do so could shaft coupling. Tighten the shaft coupling to secure the
result in objects being thrown into your eyes resulting attachment.
in possible serious injury. When handling the pruner
assembly, wear non-slip, heavy-duty protective gloves.
Wear non-skid, protective footwear that will protect your
feet and improve your footing on slippery surfaces.
8
7
1
2
Place the oil cap and tighten securely. Remove the scabbard from the chain bar.
GETTING STARTED
3
2
1
2 1
Release the telescoping collar to adjust the shaft. Once the
shaft is adjusted, secure the telescoping collar to its place.
9
Adjust the chain tension using the allen wrench.
4
3
1
Attach the shoulder strap hanger.
10
2
1
Insert the battery until the battery clicks into place.
GETTING STARTED
5
2 2
1
Loosen and remove the oil cap.
11
1
2
Slide the lock out trigger forward and squeeze the throttle trigger.
6
Add bar and chain lubricant in the bar lube reservoir for
automatic bar and chain lubrication.
NOTE: Use chain and bar oil only. Other oils will not stick
to the chain properly and will result in damage to the chain
and bar.
9