Ryobi RPP1820Li15 Instructions Manual

Ryobi RPP1820Li15 Instructions Manual

18v one + cordless pole pruner

Advertisement

ORIGINAL INSTRUCTIONS
18V ONE +
Cordless Pole Pruner
RPP1820Li15
OPP1820

Advertisement

Table of Contents
loading

Summary of Contents for Ryobi RPP1820Li15

  • Page 1 ORIGINAL INSTRUCTIONS 18V ONE + Cordless Pole Pruner RPP1820Li15 OPP1820...
  • Page 2 Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications.
  • Page 3 Safety of inattention while operating power tools may result in GENERAL POWER TOOL SAFETY WARNINGS serious personal injury. Use personal protective equipment. Always wear WARNING eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing Read all safety warnings and all instructions.
  • Page 4 Safety Use the power tool, accessories and tool bits etc. effects of vibration: in accordance with these instructions, taking into Keep your body warm in cold weather. When account the working conditions and the work to operating the unit wear gloves to keep the hands be performed.
  • Page 5 Safety MAINTENANCE ADDITIONAL SAFETY WARNINGS Make sure that the chain tension is correctly adjusted as specified in these instructions. Incorrect tension may WARNING cause the chain to disengage from the guide bar, which could result in injury. The product is not intended for use by persons (including children) with reduced physical, sensory or mental Follow instructions for lubrication, chain tensioning capabilities, or lack of experience and knowledge,...
  • Page 6 Unpacking RPP1820Li15 OPP1820...
  • Page 7 Getting started...
  • Page 8 Getting started...
  • Page 9 Getting started...
  • Page 13 Overview Overview p.10 p.11 p.13 p.14...
  • Page 14 Operation...
  • Page 15 Operation (50’)
  • Page 16 Maintenance...
  • Page 17 Maintenance...
  • Page 18 Maintenance 3-4mm...
  • Page 19 Maintenance...
  • Page 20 Maintenance...
  • Page 21 Maintenance...
  • Page 22 4.2 kg ADDING CHAIN AND BAR LUBRICANT Measured sound pressure : 83.4 dB(A) Use Ryobi bar and chain lubricant. It is designed for chains level K = 3 dB(A) and chain oilers, and is formulated to perform over a wide temperature range with no dilution required.
  • Page 23 Techtronic Industries (Australia) Pty. Ltd. Level 1, 660 Doncaster Road Doncaster, VIC 3108, Australia Techtronic Industries New Zealand Ltd. 27 Clemow Drive Mt. Wellington, Auckland 1060, New Zealand...

This manual is also suitable for:

Opp1820

Table of Contents