Ryobi OPP1850 Original Instructions Manual page 14

OPERATION
OPERATING THE PRUNER
WARNING: DANGER! Risk of electrocution!
Do not operate within 10 m of overhead electrical
power lines. Position the product at an angle of
60° or less, depending on the specific situation.
Keep bystanders at least 15 m away.
WARNING: Ensure that the chain and bar oil
has been added to the reservoir before use.
WARNING: Do not cut from a ladder; this is
extremely dangerous. Leave this operation to
professionals.
WARNING: Maintain a proper grip on the
product whenever the motor is running.
1. Insert the battery pack until it clicks into
place.
2. Slide the lock out trigger forward and
then squeeze the throttle trigger to start
operating the product.
3. Make sure to position the spike bumper to
the main limb or trunk before making the
12
≥15m
(50')
1
2
≤60˚
1
2