Troubleshooting - ResMed AirMini User Manual

Troubleshooting

If you have any problems, have a look at the following troubleshooting
topics. If you are not able to fix the problem, contact your care provider
or ResMed. Do not try to open the machine.
Problem/possible cause
Air is leaking from around my mask / Mask is too noisy
Mask may be fitted incorrectly.
The AirMini system may be assembled
incorrectly.
Air pressure in my mask seems too low / It feels like I am not getting enough air
Ramp may be in progress.
HumidX or vent might be blocked.
HumidX may be wet.
18
Solution
Make sure your mask is fitted correctly.
See your mask user guide for fitting
instructions or run the Mask Fit function
using the AirMini app to check your mask
fit and seal.
Make sure your AirMini system is correctly
assembled. Refer to Setting up and starting
therapy for more information.
Using the AirMini app, confirm the Ramp
function has been enabled. If so, wait for
air pressure to build up or turn Ramp Time
off using the AirMini app.
Inspect the HumidX and vent for blockages
or damage. Refer to Cleaning and
maintenance for more information.
The HumidX should be dry when starting
therapy. Check if HumidX is wet and
replace as necessary.