Basic Setting And Advanced Mode; Operating Readiness (Eco Mode) - Leister UNIPLAN 300 Manual

32

Basic setting and Advanced Mode

Operating readiness (Eco Mode)

14
Change between upper and lower case
Move the cursor position to enter the name
32
Insert a blank space
37
Delete one character (the character to the left of the cursor)
Select this symbol to switch to the
function display (32)
In the Basic setting, move through the Setup menu to save the recipe, to the Standby
function ("Eco Mode") and Advanced Mode.
Additional information and setting options are available in Advanced Mode.
If the motor is turned off, the heating is activated, and if no key is pressed during the
time defined under "Eco Mode" interval, then the device will switch over automatically
to the Standby display. If the "e-Drive" (31) is not pressed during the subsequent 180
seconds, then the heating will switch to Cool Down mode. Standby will then appear on
the display. Pressing "e-Drive" (31) causes the device to switch to Working mode.
Standby mode is not activated when the devices are shipped.
The desired time interval can be defined individually by selecting the Eco Mode menu
with the "e-Drive" (31) and then setting the desired value with the "e-Drive" (31).