Kohler 18464 Installation Instructions

SERVICE PARTS
18464
1082450**
Escutcheon
1082448
Screw Kit
1218537**
Wall Fixing Assy
1082444**
Shower Bracket
1082451
Screw
1082453
O-Ring
1082450**
Escutcheon
**Color code must be specified when ordering
1072932-2A-A
Shower Column
SHOWER COLUMN
1072930**
Showerhead
1072929**
Handspray
1072938**
Hose
1082445**
Diverter Kit
INSTALLATION INSTRUCTIONS
BEFORE YOU BEGIN
All information is based on the latest product information available at the time of publication. Kohler Co.
reserves the right to make changes in product characteristics, packaging, or availability at any time without
notice.
Please leave these instructions for the consumer. They contain important information.
NOTES:
1. Shut off the water supplies to the fitting.
2. Inspect the supply tubing for damage. Replace as necessary.
3. Observe local plumbing codes.
4. Recommended working pressures is 2 to 5bar(0.2~0.5MPa).
5. This faucet has diverter function only. It must be installed in conjunction with a recessed valve system
(purchased separately) that has both on/off and hot/cold control.
6. The highest working pressure for handspray & shower head is 0.5MPa(5bar). If it exceeds 0.5MPa(5bar),
a pressure reducer is needed. The highest water and environment temperature is 60ºC. Please keep
handspray, shower head and the shower arm away from heater, or it may become damaged and cause injury
to the user.
HANDLE OPERATION
Turn the diverter to change outlet. When the bulge on the diverter knob is upwards, the shower head
works. When it is downwards, water flows from handspray. Turn it in other position, water will flow from
both.
ROUGH-IN DIMENSIONS
302
65
G1/2"
Ground
4 1072932-2A-A
18464 SHOWER COLUMN
376
G1/2"
G1/2"
1000~1200
Shower Column
G1/2"
1