Maintenance - WAGNER CONTROL PRO Owner's Manual

The sprayer, hose, gun should be cleaned thoroughly after daily
use. Failure to do so permits material to cake, seriously affecting the
Attention
performance of the unit.
Always spray at the lowest possible pressure when the tip and tip
guard have been removed. To clean the airless gun, hose and spray
device, use only water or a suitable solvent. Static electricity buildup
may result in a fire or explosion in the presence of flammable vapors.
Hold the gun firmly against a metal container while flushing.

maintenance

The spray gun should be lubricated after each use.
1. Remove the spray hose from the spray gun.
2. Pour a few drops of All Guard into the opening on the gun housing where
the spray hose is attached. A light oil can be subsituted (such as 10W30
motor oil or vegetable oil, for example).
9