Advertisement
WARNING
Always inspect your equipment prior to shooting an arrow. Be-
fore you take a shot, know your target and what lies beyond your
target for safety purposes.
You are responsible for understanding and complying with any
applicable regulations for shooting a bow and arrow.
See the Important Safety and Product Information guide in the
product box for product warnings and other important information.
Removing the sensor will damage the strain gauges and render
them useless. BE SURE TO THOUROUGHLY READ INSTRUC-
TIONS AND WATCH VIDEO BEFORE ATTEMPTING TO MOUNT
YOUR SENSOR.
Mounting the sensor card incorrectly will VOID your warranty
on the sensor. If you damage your sensor you can purchase
a replacement.
Installation of Sensor
(THIS IS THE MOST CRUCIAL PART OF INSTALLING
SWEETSPOT. IF THE SENSOR IS NOT ADHERED CORRECTLY
THE SYSTEM WILL NOT BE RELIABLE.) PLEASE WATCH THE
YOUTUBE VIDEO ON SECURING YOUR SWEETSPOT SENSOR.
YOU ONLY GET ONE CHANCE AT THIS!
Step 1) Pick a mounting location –
IT MUST BE on the front of the bow,
facing the target and be flat and large
enough for the sensor to fit comfortably.
On most bows, this will be the grip.
For some, it may be higher on the riser
between the shelf and the sight. (See
Fig. 1)
Step 2) Clean the area thoroughly –
FIG. 1
Flat surface
areas
Advertisement
