Advertisement
• Use password to connect to device
To generate a new AP Password:
• Navigate to <WIFI>
• Press [Select] to switch mode to AP, if not already in
that mode
• Navigate to <PASSWORD>
• Hold [Select] until the Password changes
WIFI Connection
The device has a built-in webserver. Follow these steps to access
the homepage:
• Navigate to <WIFI>
• Press [Select] to switch mode to AP, if necessary
• Note the SSID shown
• Navigate to <PASSWORD>
• Note the Password shown
• Use the SSID and Password to connect to the WIFI
• Open the homepage 10.0.0.1 in an internet browser
Note: The device's date and time is automatically synced to your
computer/phone when you open the homepage link above. If
your device says "no internet", press dismiss. To connect via WIFI,
you do NOT need internet access or a router to do so. This works
exactly like bluetooth but reaches farther and is more secure.
Date and Time
The date and time might not be correct upon the first power-up.
To sync the date and time to the computer, follow the steps in
the Section WIFI Connection to open the homepage.
The time can be shown in 24-hour or 12-hour format:
• Navigate to <DATETIME>
• Press [Select] to switch between 24-hour and 12-hour format
Advertisement
