Advertisement
Optimal and High LED Brightness
Use the <BRIGHTNESS OTHER> menu to set the brightness of
the Pin LED:
• Navigate to <BRIGHTNESS OTHER>
• Press [Select] to begin adjustment
• Press [Left] or [Right] to decrement or increment respectively
• Hold [Left] or [Right] to repeatedly decrement or increment
respectively
• Press [Select] to apply
WIFI Modes
Use the <WIFI> menu to switch the mode between
• AP: The device behaves like an Access Point and creates a
private network
• Use the SSID shown to connect to the device
• Use the password shown on the <PASSWORD> menu
• STA: The device connects to a WIFI Router. Most commonly
used for public access.
• See Section Settings Page for router setup
• OFF: The WIFI is turned off to save battery life.
• Navigate to <WIFI>
• Press [Select] to switch modes
To generate a new AP SSID:
• Navigate to <WIFI>
• Press [Select] to switch mode to AP, if not already in that
mode
• Hold [Select] until the SSID changes
WIFI Password
Use the <PASSWORD> menu to view the password to access
WIFI in AP mode.
• Set WIFI mode to AP
• Navigate to <PASSWORD>
Advertisement
