Table of Contents
Advertisement
Quick Links
Battery Operated Hydraulic Crimping Tool
Operating Instruction Manual
IMPORTANT: Read and understand all of the instructions and safety information
in this manual before operating or servicing this tool.
BP4UCR
Table of Contents
2
3
4-5
5
6
6
7
8
TA04583 B Page 1 of 8
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Thomas & Betts BP4UCR
Summary of Contents for Thomas & Betts BP4UCR
-
Page 1: Table Of Contents
BP4UCR Battery Operated Hydraulic Crimping Tool Operating Instruction Manual IMPORTANT: Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Table of Contents 1.0 General Characteristics 2.0 Instructions for Use 3.0 Battery and Charger Use 4.0 Maintenance... -
Page 2: General Characteristics
This “BP4UCR” hydraulic tool is powered by 9.6 V DC frequency of the acceleration the upper limbs are Ni-MH battery. The tool is well balanced for optimum... -
Page 3: Instructions For Use
INSTRUCTIONS FOR USE PREPARATION (Refer to Figs 1, 2 & 3) The tool is supplied with the batteries completely discharged; before use, fully charge the batteries using the charger supplied. See section 3.0 The tool can be easily carried using either the handle or wrist “W”... -
Page 4: Battery And Charger Use
BATTERY AND CHARGER USE The tool is supplied with the batteries completely discharged; before use, fully charge the batteries using the charger supplied. BATTERY STATUS (Refer to Fig. 5) Back of Tool • After releasing the operating button, the residual battery capacity is automatically displayed for 5 seconds on the indicator (11). -
Page 5: Maintenance
(Continued) Green flashing (right-hand LED): The battery is fully charged and the charger automatically switches over to the trickle- charge mode. The battery can be left indefinitely in the charger without sustaining any damage. Overcharging is impossible. Red flashing (right-hand LED): The safety elements are defective or the battery is too hot or too cold. The battery should be removed from the charger so that it can return to its proper temperature range. -
Page 6: Spare Parts List
SPARE PARTS LIST When ordering spare parts always specify the following: • Code number of item • Name of item • Type of tool • Tool serial number Warranty is void if replaced parts are not Thomas & Betts original replacement parts. For parts or service, contact the tool service center at 1-800-284-TOOL (8665) TABLE 1 See TABLE 2... - Page 7 TABLE 2 ITEMS ITEMS Code Nº DESCRIPTION Code Nº DESCRIPTION Main Main 6000625 Rubber Grip 6520160 Spring 6000597 Actuating Mechanical Group 6340590 Grub Screw 6000357 Housing 6520200 Spring 6000358 Gear 6740120 7/32” Ball 6760004 Ø 2x8 Cylindrical Pin 6640205 D. 4 Schnorr Washer 6900008 M3x6 Screw 3041046...
- Page 8 TABLE 3 for JAW CDD6 Code Nº ITEM DESCRIPTION 6000630 Rubber Cover 6600022 Die Retainer Pin 6520404 Spring 6520630 Spring 6180171 M3 Autolock Nut 6760085 Ø 3x12 Elastic Pin For parts or service, contact the tool service center at 1-800-284-TOOL (8665) WARRANTY: Thomas &...
Need help?
Do you have a question about the BP4UCR and is the answer not in the manual?
Questions and answers