Troubleshooting - KitchenAid KSB1585 Manual

Table of Contents

Advertisement

Available languages

Available languages

CMD + SHIFT CLICK TO CHANGE COPY

TROUBLESHOOTING

IMPORTANT: The Blender will not operate at any speed unless the POWER (
is pressed first�
Blender does not operate when a setting is selected
No indicator lights are lit�
All indicator lights are flashing at the
same time�
One indicator light is flashing alternately�
Blender stops while blending
All indicator lights are flashing
at the same time�
All indicator lights are flashing alternately�
© 2016� All rights reserved�
Specifications subject to change without notice.
Check to see if the Blender is plugged
into a grounded outlet� If it is, press
POWER (
); then unplug the Blender�
Plug it back in to the same outlet, and
Press POWER (
)� If the Blender still
does not work, check the fuse or circuit
breaker on the electrical circuit the
Blender is connected to and make sure the
circuit is closed�
If the Blender is plugged in, but nothing
happens when POWER (
all indicator lights are flashing, the motor
rotor may be locked� Press POWER (
then unplug the Blender� Plug it back in;
then press POWER (
desired speed�
If the Blender is plugged in, but will not start
and one light is flashing alternately from all
the other indicator lights, the Blender may
have a stuck key� Press POWER (
off the Blender; then unplug the Blender� Plug
the Blender back in and press POWER (
to turn back on to reset the stuck key�
The Blender may be overloaded� If the
Blender becomes overloaded when blending
heavy ingredients, it will automatically shut
off to avoid damage to the motor� Press
POWER (
) to reset the Blender and unplug
the power cord� Remove the pitcher assembly
from the base and divide contents into
smaller batches� Adding liquid to the pitcher
may also reduce the load on the Blender�
The Blender may be jammed� If it is
jammed, the Blender will stop running to
avoid damage to the motor� Press POWER
(
) to reset the Blender and unplug the
power cord� Remove the pitcher assembly
from the base and, with a scraper, free
the blades by breaking up or removing the
contents at the bottom of the pitcher�
) button
) is pressed, and
);
) and select the
) to turn
)
15

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents