Technical Specifications; Surface-Mounted Ns Series Network Sensors With Lcd (Part 1 Of 2) - Johnson Controls NS-AP Series Installation Instructions Manual

Technical Specifications

Surface-Mounted NS Series Network Sensors with LCD (Part 1 of 2)

Supply Voltage
Current Temperature
Consumption Only Models
Temperature
and Humidity
Models
Terminations
Network NS-AHx7003-0,
Sensor NS-APB7003-0,
Addressing NS-ATx7003-0
Models
All Other
Models
Wire Size Modular Jack
Models
Screw
Terminal Block
Models
Communication Rate
Temperature Measurement
Range
Humidity Full Range
Measurement
Calibrated
Range
Range
Temperature Sensor Type
Humidity Sensor Type
Temperature Resolution
Temperature NS Series
Accuracy Network Zone
Sensor
Temperature
Element Only
Humidity NS-APx700x-0
Element Models
Accuracy
NS-AHx700x-0
Models
Time Constant
Default Temperature Setpoint
Adjustment Range
Ambient Operating
Conditions
Storage
9.8 to 16.5 VDC; 15 VDC Nominal (From SA Bus)
21 mA Maximum (Non-transmitting)
25 mA Maximum (Non-transmitting)
Modular Jack or Screw Terminal Block
DIP Switch Set from 200 to 203; Factory Set at 203
Fixed Address of 199
24 or 26 AWG (0.5 or 0.4 mm Diameter); Three Twisted Pair (Six Conductors)
18 to 22 AWG (1.0 to 0.6 mm Diameter); 22 AWG (0.6 mm Diameter) Recommended
Auto-Detect: 9.6k, 19.2k, 38.4k, or 76.8k bps
32.0°F/0.0°C to 104.0°F/40.0°C
0 to 100% RH
10 to 90% RH
Local 1k Ohm Platinum Resistance Temperature Detector (RTD); Class A per IEC
60751
Thin Film Capacitive Sensor
±0.5F°/±0.5C°
±1.0F°/±0.6C°
0.35F° at 70°F (0.19C° at 21°C)
±2% RH for 20 to 80% RH;
±4% RH for 10 to 20% and 80 to 90% RH
±3% RH for 20 to 80% RH;
±6% RH for 10 to 20% and 80 to 90% RH
10 Minutes Nominal at 10 fpm Airflow
50.0°F/10.0°C to 86.0°F/30.0°C in 0.5° Increments
32 to 104°F (0 to 40°C); 10 to 90% RH, Noncondensing;
85°F (29°C) Maximum Dew Point
-4 to 140°F (-20 to 60°C); 5 to 95% RH, Noncondensing
Surface-Mounted NS Series Network Sensors with LCD Installation Instructions 5