Ricoh Pro Series Operating Instructions Manual page 45

Replacing the Paper Feed Rollers
5. Remove the 2 screws, and then pull out the paper feed unit until it stops.
6. Remove the screw, and then slide the bracket.
7. Remove the paper feed roller in the following order:
(1) Snap ring and pick-up roller
(2) Snap ring and feed roller
(3) Snap ring and separation roller
8. Attach the new paper feed roller in the following order:
(1) Separation roller and snap ring
(2) Feed roller and snap ring
(3) Pick-up roller and snap ring
45