Ricoh Pro Series Operating Instructions Manual page 12

Read This First

The fusing unit becomes extremely hot during operation. To prevent minor burns,
allow the machine to cool for at least 30 minutes before you remove the fusing unit.

The fusing unit weighs approximately around 20.0 kg (44.1 lb).

When moving the fusing unit, lift it slowly and be careful not to strain yourself.
Careless handling or over-exertion when lifting can result in breakage of the unit or
injury to yourself.

Do not crush or squeeze toner containers. Doing so can cause toner spillage,
possibly resulting in dirtying of skin, clothing, and floor, and accidental ingestion.

Store toner (new or used), toner containers, and components that have been in
contact with toner out of reach of children.

If toner or used toner is inhaled, gargle with plenty of water and move into a fresh air
environment. Consult a doctor if necessary.

If toner or used toner gets into your eyes, flush immediately with large amounts of
water. Consult a doctor if necessary.

If toner or used toner is swallowed, dilute by drinking a large amount of water.
Consult a doctor if necessary.

When removing jammed paper or replacing toner, avoid getting toner (new or used)
on your clothing. If toner comes into contact with your clothing, wash the stained
area with cold water. Hot water will set the toner into the fabric and make removing
the stain impossible.
12