Multiple Drive Letter Mode And Single Drive Letter Mode - Teac CD-C68E User Manual

4.5 Multiple Drive Letter Mode and Single Drive Letter Mode

(1) Multiple Drive Letter mode
Normally the dedicated device driver is installed when connecting the CD-C68E. In this case different
drive letters are assigned to the individual slots of CD-C68E. This is called the Multiple Drive Letter
mode.
If the drive letter E for example is assigned to the first of the six slots, F is assigned to the second slot,
and so on, as follows:
Slot 1 E:
Slot 2 F:
Slot 3 G:
Slot 4 H:
Slot 5 I:
Slot 6 J:
(2) Single Drive Letter mode
In this mode a drive letter is assigned to a drive, not to a slot as in the Multiple Drive Letter mode.
In other words all the slots have one and the same drive letter; so, with the CD-C68E, accessing
a specific slot is achieved by changing the current slot by pressing the desired slot button more than
1 seconds, or by using the Disc Change Utility.
The disc in slot 1 is the default disc and if the letter E is assigned to the first of the six slot drives,
the screen will read:
Slot 1 E:
If you want to change the current disc slot to slot 2, use the Disc Change Utility to change the
screen to:
Slot 2 E:
Note: To switch from Single Drive Letter mode to Multiple Drive Letter mode and vice versa, install the
device driver (an alternative is to execute the Changer Assistance Utility).