Disc Change Utility - Teac CD-C68E User Manual

4.3 Disc Change Utility

(1) DOS (CS.EXE)
(a) Installation
This utility is installed as a result of installing the device driver.
(b) Functions
CS is a utility that is executed when you respond to the DOS command prompt, the DOS that
comes with the CD-C68E, and it offers the following functions in regard to the discs corresponding
to slot numbers 1 to 6 (the numbers marked on the front bezel):
1. Ejecting CD
C:\>CS-E [slot number]
2. Changing the current slot while in Single Drive Letter mode
C:\>CS [slot number]
Note: You can use CS.EXE only while in Single Drive Letter mode. To use it, either move the prompt
to the directory in which CS.EXE is contained or specify the necessary directory path
into AUTOEXEC.BAT. If you are using drives or device drivers other than the TEAC ones,
we cannot guarantee the correct functions.
(2) Windows 3.1 (CDInfo)
(a) Installation
This utility is installed as a result of installing the TEAC CDP.
(b) Functions
CDInfo is a Windows 3.1 version utility contained in CD-C68E, and offers the following functions
in regard to the discs corresponding to slot numbers 1 to 6 (the numbers marked
on the front bezel):
1. Displaying information on CD and the volume label.
To get this display, either double-click the desired slot number, or right-click the slot number,
then select "Change".
2. Ejecting CD
Right-click the desired slot number and select "Eject".
3. Changing the current slot while in Single Drive Letter mode
Either double-click the desired slot number, or right-click the slot number, then select "Change".
Note: When multiple CD-ROM drives and CD-ROM Changer drives are connected, you can use up to
24 drive letters. If you are not using the TEAC drives or device drivers, we cannot guarantee
the correct functions.