Setting Mode - Teac ESOTERIC P-05X Owner's Manual

Setting mode

1
Press the MENU button repeatedly to select the
item to change.
Each time you press the MENU button, the item shown on the
display changes as follows.
OUT>
c
CLK>
c
DAC>
o If you do nothing for 10 or more seconds, setting mode will
end and ordinary display will resume.
o Press the stop (8) button to end setting mode.
o Settings can only be changed when the unit is stopped. If
the unit is playing back, press the stop (8) button to stop it
before conducting these operations.
APS>
3
DPaOFF>
3
LAYER>
2
Use the .// buttons to change the settings.
For information about the settings, see pages 24–26.
If you do nothing for 10 or more seconds or press the stop (8)
button once, setting mode will end and ordinary display will
resume.
o You can also use the remote control skip (.//) buttons for
these operations.
o Settings are retained even if the power plug is disconnected.
23