Table of Contents
Advertisement
Safety, Environmental and Regulatory Information
3
Safety, Environmental and Regulatory Information
3.1
Scope
The present section addresses safety, environmental and regulatory information for the Ewon
Flexy 205.
This safety, environmental and regulatory information generally has a similar compliance frame
but some aspects differ. For example: in the case of telecommunication extension cards,
additional directives, standards and instructions apply.
3.2
Power Supply
The external power supply is a third party device that is not part of this certification.
The device shall be powered by an LPS power supply certified according to IEC/UL60950-1 or
Class2 per NEC or by a 12-24Vdc 100w max. certified for 60°C and for altitudes up to 2000m for
conformity to the UL/IEC 62368-1 (for more information, refer to
Power Supply, p.
3.3
ESD Damage Prevention
To avoid possible damage to the base unit and / or extension card, please wait 30 seconds after
switching off the equipment before inserting (or removing) an extension card.
The printed circuit boards (PCBs) of the Ewon Flexy 205 described in the present document are
partially exposed when slot fillers are removed to place extension cards. In order to avoid ESD
damage, the product, when it is opened, must be handled with the necessary precaution
including:
•
Grounded ESD functional work surface
•
Personal grounding
•
Verification that the configuration is compatible with the firmware capabilities before being
operated.
The extension cards described in this document are modules exposing both sides of an electronic
printed circuit board. Therefore, they are packed in anti static ESD bags. In order to avoid ESD
damage, the product must be handled with the necessary precaution as described above.
3.4
Applicable Directives, Standards and Compliance
The Ewon Flexy 205 belongs to class A Information Technology Equipment (ITE). In a domestic
environment, this product may cause radio interference in which case the user might have to
take appropriate measures.
3.4.1
Conformity to European Directives
The Ewon Flexy 205 and its extension cards are in conformity with the following EC directives:
•
RoHS Directive 2011/65/EU
•
EMC Directive 2014/30/EU
Flexy 205 Installation Guide
25).
Always use ESD precautions when handling extension cards and / or opened base unit as
they contain parts and assemblies susceptible to be damaged by electrostatic discharge
(ESD).
Specification of the External
IG-0028-00 1.3 en-US
7 (32)
Advertisement
Table of Contents
