Reference Standards For Type Tests - HMS Networks Ewon Flexy 205 Installation Manual

Hide thumbs Also See for Ewon Flexy 205:
Table of Contents

Advertisement

Safety, Environmental and Regulatory Information
RE Directive 2014/53/EU
3.4.2
Applicable Safety Standards
The Ewon Flexy 205 and its extension cards are in conformity with the following safety
standards:
IEC/EN 60950-1
UL 60950-1
CSA-C22.2 No 60950-1-07
EN/IEC 62368-1
UL 62368-1
CAN 62368-1
3.4.3
FCC Compliance
The Ewon Flexy 205 and its extension cards comply with Part 15 of the FCC Rules.
Operating is subject to the following two conditions:
This device may not cause harmful interference
This device must accept any interference received, including interference that may cause
undesired operation.
3.4.4
Certifications
The Ewon Flexy 205 and its extension cards have been duly certified by authorized bodies:
UL Certificate of Compliance (COC) # 20190529_E350576
CB certificate # DK-84039-UL
These certificates can be downloaded on
3.5

Reference Standards for Type Tests

The Ewon Flexy 205 and their extension cards have been fully validated on temperature,
vibration and shock against the requirements of the following standards:
Operating & Storage Temperature
Test nature
Cold test
Dry heat test
Temperature change test
Cyclic damp heat test
Vibration & Shock Tests
Test nature
Vibration test (sinusoidal)
Vibration test (broad-band random)
Shock test
1.
When applicable, the product conforms to the corresponding RE Directive articles: RF spectrum efficiency: Art 3(2); EMC: Art. 3
(1)(b); Safety: Art. (3)(1)(a)
Flexy 205 Installation Guide
1
www.ewon.biz/support
Reference Standard
IEC 60068-2-1
IEC 60068-2-2
IEC 60068-2-14
IEC 60068-2-30
Reference Standard
IEC 60068-2-6
IEC 60068-2-64
IEC60068-2-27
8 (32)
IG-0028-00 1.3 en-US

Advertisement

Table of Contents
loading

Table of Contents