Table of Contents
Advertisement
Extension Cards
5
Extension Cards
5.1
Slot Compatibility
The reference code of the extension cards includes a letter that defines their compatibility with a
certain type of slots. In the case of the Flexy 205:
•
FLA xxxx, FLB xxxx, FLX xxxx- designates cards that fit into either slots
•
FLCxxxx - designates cards that fit into the Flexy 205 only (not compatibility with the Ewon
Flexy 10x or 20x).
The Type A, Type B or Type X slots are important for Flexy 10x and 20x. The Flexy 205 is compatible with
all extension cards and doesn't rely on the reference code of the extension cards to position them.
In addition to the card reference, each type of extension card bears a visual compatibility symbol
on its front panel.
Fig. 12
Slot Compatibility Markings
Indication
1
2
3
4
5.2
Extension Card Insertion
Remove the slot filler of the location the new card will be inserted. To do this, press on both
ends of the cover, note that the hooks are off-centered.
Insert the extension card carefully and slide it down until the hook clicks. Make sure the card is
completely inserted. DO NOT insist if a resistance is felt when trying to insert the card.
Flexy 205 Installation Guide
Design
Location
●●○○
Any slot - Type A
●●●●
Any slot - Type X
○○●●
Any slot - Type B
○○○○
Any slot - Type C
Wait 30 seconds after turning off the equipment before inserting (or removing) an
extension card in order to avoid possible damage to the Ewon Flexy 205 and the
extension cards.
18 (32)
IG-0028-00 1.3 en-US
Advertisement
Table of Contents
