Changing The Battery; Charging The Battery - lopital Amfora Instructions For Use Manual

Changing the battery

• The battery is fully charged when all the boxes in the
display on the control box are black.
• As soon as a plug symbol is displayed the battery must
be changed and charged.
• To remove the battery, unlock the pole (1) on the bat-
tery with one hand and then remove the battery (2).
• Before inserting the fully charged battery, first place
the battery against the housing of the electronics and
then click it into the holder.
Comments: Ensure that the stretcher/changing
table is always ready for use by having a fully
charged battery in reserve.

Charging the battery

• Place the empty battery on the battery charger.
• A green light indicates that the battery charger is
active, an orange light indicates that charging is
taking place. This light switches off when the battery
is charged.
• The charged battery can remain on the battery charger without this causing damage.
• To remove the battery, unlock the pole on the battery with one hand while supporting
the battery with the other hand.
Comments: Only use the batteries that are supplied with the stretcher/changing
table. Charge batteries that are not in use every six months in order to prevent
damage. Charging batteries before they are completely empty will extend their
life span.
Important!
Never use the battery charger in the bathroom or in a humid environment!
Shower stretcher & changing table | Instructions for use | 7
2 1