Table of Contents
Advertisement
3.0
Unscrew the fuel filler cap (1).
3.1
Slowly fill with a 40:1 ratio of 2 stroke fuel/oil mixture and leave a 25mm gap
between the fuel and the top of the fuel tank (2).
3.2
Refit the fuel filler cap securely (3).
5. STARTING PROCEDURE
DANGER
Petrol machinery produces Carbon Monoxide – a poisonous, colourless and
odourless gas that can cause serious injury or death.
Petrol is Highly Flammable.
Always handle with extreme care and in a well ventilated area.
FROM COLD
4.0
Fill the fuel tank with the correct 40:1 mix of unleaded petrol and semi-synthetic 2 stroke
engine oil.
DO NOT overfill, leave a 25mm gap at the top of the fuel tank.
4.1
Firmly press the primer bulb 6 times or until a fuel mixture is visible in the bulb (1).
4.2
Move the choke lever to the ON (choke) position (2).
4.3
Move the ignition switch on the main handle to the START position (3).
12
Advertisement
Table of Contents
