Table of Contents
Advertisement
3. ASSEMBLY
CAUTION
Petrol machinery produces Carbon Monoxide – a poisonous, colourless and
odourless gas that can cause serious injury or death.
Petrol is Highly Flammable.
Always handle with extreme care and in a well ventilated area.
2.0
Place the auger on a flat level surface (1).
2.1
Locate the hole in the shaft of the main auger unit (2).
2.2
Select one of the 3 auger bits (3).
2.3
Slide the auger bit over the shaft on the main auger unit and ensure that the hole on
the shaft and the hole on the auger bit, line up (4).
2.4
Pass the locking bolt through the auger shaft (5).
2.5
Continue until the locking bolt passes all the way through (6).
Assembly and Starting Procedures are also available via
the P1PE YouTube channel.
Simply search for P1PE on YouTube.
10
Advertisement
Table of Contents
