Table of Contents
Advertisement
2.6
Insert the locking pin into the hole in the locking bolt (7).
2.7
Slide through until it locks into place (8).
2.8
The auger should now be fully assembled (9).
4. FUELLING
NOTE
This machine uses a 2 Stroke Fuel Mixture at a ratio of 40:1.
Failure to use the correct fuel/2stroke oil mixture will result in engine damage that
will not be covered by the warranty.
40 Parts Unleaded Petrol
DANGER
All fuels are highly flammable and must be handles and stored correctly.
Always fuel and de-fuel in a well ventilated area away from any possible sources
of ignition and always allow the engine to cool before refuelling.
Leave a 25mm gap between the fuel and the top of the fuel tank.
1 litre
2 litres
3 litres
4 litres
5 litres
1 Part 2 Stroke Semi-Synthetic Oil
11
25ml
50ml
75ml
100ml
125ml
Advertisement
Table of Contents
