Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for FARFISA INTERCOMS PDX 2000
Summary of Contents for FARFISA INTERCOMS PDX 2000
- Page 1 Mi 2453 PDX 2000 SWITCHBOARD for DUO System Mi 2453...
-
Page 2: Safety Notices
INDEX Introduction Installation and connection Operating functions Operating instructions Operation SAFETY NOTICES Read the instructions contained in this manual carefully because they provide important information about safe installation, use and maintenance. Keep this manual ap- propriately for future reference. Install your switchboard in a dry place away from heat sources or devices that produce heat and magnetic fields. - Page 3 Main functions Introduction - Three operating modes: day, night and direct call Switchboard PDX2000 is a component of the Digital System - Communication between internal users or internal users “DUO” and comes with a table adaptor and junction box for and door stations an easy connection to the installation.
-
Page 4: Status Bar
Display LED’s Under the display there are 8 LED’s which indicate some The display is organized into 3 different areas important functions of the switchboard. - Status bar Shows that one or more bookings are present 21.09.11 11.06 - Name and address of internal users User and door stations... -
Page 5: Installation And Connection
Installation and connection Terminal board The Switchboard is ready for the installation on a desk. LI / LI Duo line input Fix the junction box to the wall with screws and expansion LO / LO Duo line output Ø plugs or to a wall box ( =60mm) and make the connection A / A Auxiliary power input according to the installation diagram. - Page 6 Table of the maximum permitted distances Art.2302 Farfisa cable Twisted pair cable specified for the digital instal- lation with DUO systems. The use of inappropri- Section* Farfisa 2302 cable Twisted cable CAT5 cable ate cables may have an adverse effect on the 2x1mm²...
- Page 7 INTERCOM-VIDEOINTERCOM MULTI WAY SYSTEM WITH 1 MAIN DOOR STATION AND A SWITCHBOARD DV2421P termination 47W 1 2 3 4 5 termination 70W termination 100W 1 2 3 4 5 1 2 3 4 5 EH9262+9083 EX3262+WB3262 KM8262+WB8262 EX362 KM862 2-3 open line (default) 1 2 3 4 5 1 2 3 4 5 DV2422A...
- Page 8 CONNECTION OF A SWITCHBOARD IN A MULTI WAY SYSTEM WITH 2 SECONDARY LINES CONNECTED TO 2 MAIN DOOR STATIONS. Example 1. Serial connection of the DUO line to the exchanger switchboard. secondary line “b” secondary line “a” 2273 LP LP 2221ML Note.
-
Page 9: Operating Functions
Operating functions Ringer tones OFF and ON To set OFF (or ON) all the ringer tones of the switchboard it is The switchboard can operate in the following operating mode: necessary: - access the menu “Device Manager” by pressing OFF, ON and Direct Call. shortly the button - select “Silent”... - Page 10 Operations 21.09.11 11.06 21.09.11 11.06 Make a call from Switchboard Entrance Entrance Oxford street Oxford street To make a call from the switchboard to an internal user it Alfred Brown Alfred Brown is necessary to dial the number of the required user using the keypad or select the name of the required user from the HIAMA directory (see chapter “directory”) and then press...
-
Page 11: Door Lock Release
nication with the switchboard will be put on hold Door lock release - if the address of the internal user which is displayed is At any moment the lock of a door can be released by press- correct press ing the button . - Page 12 Modify a user’s name or user’s address Menu In the directory select the requested user - press Pressing this button you will access to the settings, select “modify” - press - using the button place programming and operating modes of the switchboard: the cursor to the last character of the name to be modified Directory, Door Stations, Booking, Op- - press several times...
-
Page 13: Door Stations
a blank space than a 3 figures address, again a semicolon Operating Mode as separator followed by a blank space and 1 figure number You access the operating modes of switchboard (“day” or than a semicolon as separator without any blank space. “direct calling”). -
Page 14: Ringing Volume
Ringing Volume Operating mode of the internal relay. Relay inside the switchboard (terminal boards C, NC, NO) Ringing volume is the same for all the kind of calls. can be used for: - To adjust it select “Volume” and press - additional ringer for the incoming calls, a lamp signaller - an adjusting bar is displayed on can also be driven... -
Page 15: Software Updating
System Reset Reset button is placed on the top of switchboard and can be Attention. In this submenu there are some parameters whose operated only with a small stylus. To reset the switchboard changing can affect the correct operation of the system. It is keep pressed it for some seconds (avoiding to make an ex- necessary to modify these parameters only if in the system cessive strength), the switchboard will reboot soon without... - Page 16 Cod. 52704880 Mi 2453 Mi 2453...
Need help?
Do you have a question about the PDX 2000 and is the answer not in the manual?
Questions and answers