Minimum Space Requirements - Toshiba E-STUDIO900 Technical Training Manual

4.1.3 MINIMUM SPACE REQUIREMENTS

Place the copier near the power source, providing clearance as shown below. The
same amount of clearance is necessary when optional equipment is installed.
Copier + Finisher + LCT + By-pass Tray
400 mm (16")
Copier + Finisher
400 mm (16")
NOTE: The controller box door on the back of the machine swings open and can
be removed. Door removal is required only if the machine cannot pass
through a narrow door.
PTM
200 mm (8")
555 mm (22")
200 mm (8")
555 mm (22")
4-3
30 mm (2")
B070I410.WMF
30 mm (2")
B070I023.WMF
B070/B071