Toshiba E-STUDIO900 Technical Training Manual page 182

Symbol
S07 Staple Mode HP 2
Shift Lower Limit – Large
S09
Paper
S10 Shift Tray Lower Limit 2
S11 Shift Tray Lower Limit 3
S12 Shift Mode HP
S13 Stacking Roller HP
S14 Shift Tray Half-Turn
S15 Pre-Stack Tray Paper
S16 Stapler Tray Exit
S17 Positioning Roller HP
S18 Stack Feed-Out Belt HP
S19 Stapler Tray Paper
S20 Jogger HP
S21 Stack Plate - Center HP
S22 Stack Plate – Front
S23 Stack Plate – Rear
S24 Stapler HP
S25 Stapler Rotation HP
S26 Stapler Return
S27 Staple Waste Hopper
S28 Punch Waste Hopper
S29 Punch HP 1
S30 Punch HP 2
S31 Shift Jogger HP
S32 Shift Jogger Lift HP
PTM
Name
Detects the shift tray home position for standby mode
and for staple mode.
Detects the lower limit for the shift tray when large
paper sizes are being used
Not used.
Detects when the shift tray is at its lower limit.
Detects the shift tray home position in sort/stack mode.
Detects when the stacking roller is at home position.
Detects whether the shift tray is at either the front or
home HP.
Determines when to turn off the pre-stack paper stopper
solenoid.
Detects jams at the staple tray exit.
Detects the home position of the positioning roller.
Detects the home position of the stack feed-out belt.
Detects the copy paper in the stapler tray.
Detects the home position of the shift jogger fences.
Detects the home position of the center stack plate.
Detects the home position of the front stack plate.
Detects the home position of the rear stack plate.
Detects the home position of the staple unit for side-to-
side movement.
Detects the home position of the stapler unit for 45-
degree rotation.
Detects the on timing of the stapler return solenoid.
Detects when the staple waste hopper is full.
Detects when the punch waste hopper is full and
detects when the punch tray is set. Punch Unit B531
(option).
Detects the cam home position for the 2-hole punch.
Punch Unit B531 (option).
Detects the cam home position for 3/4 punch. Punch
Unit B531 (option).
Detects the home position of the jogger unit arms during
paper alignment. Jogger Unit B513 (option).
Detects the when both shift jogger fences are at the
lowered position and ready to move against the sides of
the stack. Jogger Unit B513 (option).
7-7
Function
B070/B071