Toshiba E-STUDIO900 Technical Training Manual page 104

Feed-out
[D]
[B]
[A]
[C]
B070D804.WMF
[E] [B]
[F] [C]
B070D805.WMF
After jogging, the reverse roller solenoid [A] energizes to push down the reverse
trigger roller [B]. The reverse roller [C] turns counterclockwise continuously, so the
paper starts to reverse when the reverse trigger roller is down and catches the paper
between the rollers. The inverter guide plate solenoid [D] energizes to lower the
inverter guide plate [E], so that the paper is guided by the inverter guide plate. The
next sheet waits at the inverter guide plate.
The paper is fed from the reverse roller to the inverter exit roller [F]. After the paper
starts to be fed by the inverter exit roller, the reverse trigger roller and inverter guide
plate move back up.
PTM 2-79 B070/B071