Toshiba E-STUDIO900 Technical Training Manual page 141

5.5.3 PICK-UP AND FEED
[I]
[D]
[C]
[G]
[H]
[A]
[E]
[B]
[F]
B511D105.WMF
When a paper feed station is not selected, its separation roller solenoid [A] is de-
activated and the separation roller [B] can turn freely.
When the paper feed station is selected and the Start key is pressed, the feed
clutch [C], separation roller solenoid [A], and pick-up solenoid [D] turn on.
When the feed clutch [C] actuates, it drives the feed roller [E], and turns the pick-up
roller [F] because it is linked to the feed roller by an idle gear [G].
When the separation roller solenoid [A] turns on, the separation roller [B] contacts
the paper feed roller [E] and turns with the feed roller, unless more than one sheet
of paper is fed. The three trays of the LCT unit use the standard FRR mechanism.
Handling Paper> Paper Feed Methods> Forward and Reverse Roller
(FRR)
When the pick-up solenoid [D] actuates, the pick-up roller [F] lowers until it contacts
the top sheet of the paper stack and then sends it to the paper feed and separation
roller.
When the paper feed sensor [H] detects the leading edge of the paper, the pick-up
solenoid de-actuates and lifts the pick-up roller [F], and the grip roller clutch [I]
actuates and feeds the paper out of the tray.
B070/B071 5-8 PTM