Toshiba E-STUDIO900 Technical Training Manual page 90

2.8.2 DRIVE
9
1. Paper Feed Motor
2. Paper Feed Clutches 1 to 3
3. Vertical Transport Clutches 1 to 3
4. Lower Relay Clutch
5. Relay Motor
The paper feed motor (1) drives feed, pick-up, and separation rollers in trays 1, 2, and
3 via timing belts, clutches (2), and gears. The paper feed motor also drives the
vertical transport rollers and the lower relay roller. Drive is transferred to each of the
three vertical transport rollers by a vertical transport clutch (3), and to the lower relay
roller by the lower relay clutch (4).
The relay motor (5) drives the upper relay roller and LCT relay roller via gears and
clutches (6) and (7).
The 2nd vertical transport clutch has a one-way-gear (8). This prevents the clutch from
slipping when the knob (9) is turned to remove jammed paper in the paper feed tray
and vertical transport area.
PTM
8
3
2-65
7
6
5
3
2
4
2
B070D709.WMF
6. Upper Relay Clutch
7. LCT Relay Clutch
8. One-way Gear
9. Knob
1
B070/B071