Pari EasyCare Manual page 12

5 Backwash procedure
5.1 Operation
• Start the backwash by pressing the start button on the eFlow
unit.
The processing time for 5 ml is at least 10 min.
5.2 End
After rinsing, the eFlow
present in the funnel, please restart.
Note:
At the end of the rinsing process, it is possible for mist to escape from
the easycare filling funnel. This is normal. The eFlow
can also be switched off manually by pressing the ON/OFF button.
6 Disassemble the easycare cleaning aid
• Detach the eFlow
the eFlow control unit.
®
• Open the easycare reservoir and remove the eFlow
pressing on the two lateral engaging hooks (disinfection or sterilisation of
the aerosol head see Chapter "Hygienic Re-use" in the eFlow
tions for Use).
• Discard the rinsing solution from the easycare reservoir.
7 Clean the easycare cleaning aid
After each use, clean with warm tap water and dishwashing liquid. Then dry
thoroughly and store opened and turned over on a clean surface.
12
control unit automatically switches off. If liquid is still
®
connection cord from the easycare reservoir and from
®
control
®
control unit then
®
aerosol head by
®
Instruc-
®